BNXPH - PRO-HIDE PLUS LATEX SATIN ENAMEL PRO BASE

  • MSDS: BNXPH
  • Manufacturer: PRATT AND LAMBERT INC
  • Product Name: PRO-HIDE PLUS LATEX SATIN ENAMEL PRO BASE
  • National Stock Number: 8010-00F024421
Product Identification

Product ID:PRO-HIDE PLUS LATEX SATIN ENAMEL PRO BASE
MSDS Date:07/30/1991
FSC:8010
NIIN:00F024421
MSDS Number: BNXPH

Responsible Party
PRATT AND LAMBERT INC
75 TONAWANDA ST
BUFFALO, NY 14240

Emergency Phone: (716) 873-6000

Info Phone: (716) 873-6000

Cage: 61196

Contractor
PRATT AND LAMBERT INC
CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

10.3

RTECS: 9999999WG


1.32 LBS/GAL LESS WATER & NPRS; 1.53

RTECS: 9999999VO


TITANIUM DIOXIDE, TITANIUM(IV) OXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. INHALATION:
RESPIRATORY IRRITATION. INGESTION: GASTROINTESTINAL IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. INHALATION: RESPIRATORY
IRRITATION. INGESTION: GASTROINTESTINAL IRRITATION.

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS.
INHALATION: REMOVE TO FRESH AIR. INGESTION: OBTAIN MEDICAL
ATTENTION IN ALL CASES. NOTE TO PHYSICIAN: ANY TREATMENT THAT MIGHT
BE REQUIRED FOR OVERE XPOSURE SHOULD BE DIRECTED AT THE CONTROL OF
SYMPTOMS & THE CLINICAL CONDITIONS.

Fire Fighting

Flash Point Method:SCC
Flash Point:>200F
Extinguishing Media:CO2, ALL PURPOSE DRY CHEMICAL OR ALCOHOL FOAM,
POLYMER FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. WATER
MAY BE INEFFECTIVE, BUT COULD BE USED TO COOL EXPOSED CONTAINERS.
IF WATER IS USED FOG NOZZLES PREFERRED.

Accidental Release

Spill Release Procedures:CONFINE IN SMALL AREA. USE ABSORBENT TO CLEAN
UP. PLACE IN CONTAINER FOR DISPOSAL.

Exposure Controls

Ventilation:LOCAL EXHAUST
Supplemental Safety and Health
BOILING RANGE: -28 TO 369 F

Chemical Properties

Boiling Pt:B.P. Text:SEE SUPP.
Vapor Density:>AIR
Spec Gravity:1.2
Evaporation Rate & Reference:SLOWER THEN DIETHYL ETHER
Percent Volatiles by Volume:64%

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, TEMPS >100F & OTHER SOURCES OF
IGNITION
Hazardous Decomposition Products:SMOKE, CO & CO2

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.